Noise Reduction Performance of Various Signals for Impulse Response Measurement

Kaneda Y. Noise Reduction Performance of Various Signals for Impulse Response Measurement. J Audio Eng Soc. 2015;63(5):348-357. doi:10.17743/jaes.2015.0024

@article{Kaneda2015_17640,
  author = {Kaneda, Yutaka},
  title = {{Noise Reduction Performance of Various Signals for Impulse Response Measurement}},
  journal = {Journal of the Audio Engineering Society},
  volume = {63},
  number = {5},
  pages = {348--357},
  year = {2015},
  month = may,
  publisher = {Audio Engineering Society},
  doi = {10.17743/jaes.2015.0024},
  url = {https://doi.org/10.17743/jaes.2015.0024}
}

TY  - JOUR
TI  - Noise Reduction Performance of Various Signals for Impulse Response Measurement
AU  - Kaneda, Yutaka
T2  - Journal of the Audio Engineering Society
J2  - J. Audio Eng. Soc.
VL  - 63
IS  - 5
SP  - 348
EP  - 357
PY  - 2015
DA  - 2015/05/06
DO  - 10.17743/jaes.2015.0024
UR  - https://doi.org/10.17743/jaes.2015.0024
PB  - Audio Engineering Society
LA  - en
AB  - When measuring the acoustic impulse response in a real environment, acoustic and electrical noise corrupts the result. To improve the quality of measurements, researchers often use various excitation measurement signals, such as a linearly swept sine (SS) wave or a maximum length sequence (MLS) signal because they have high energy at all frequencies. But when the noise is dominated by low-frequency components, the S/N in this region is reduced. In this study, the noise reduction performance (NRP) of different excitation signals was theoretically examined to derive equations that can determine the NRP from the spectra of the measurement signal and noise. From the theoretical and experimental examinations, the following results were obtained. The NPR for white signals and noise-whitening signals is actually the same. Only the minimum noise (MN) signal that minimizes the noise component showed a significant improvement in NPR. A pink spectrum measurement signal showed good NPR in the presence of 1/k2 spectrum noise, where k is the discrete frequency number, but worse performance with other types of noise. This supports the conclusion that using the MN signal, which has a power spectrum that is the square root of the power spectrum of the noise, is the best method of reducing the effect of noise on the measured impulse response.
ER  -