A New Methodology for the Acoustic Design of Compression Driver Phase-Plugs with Concentric Annular Channels

Dodd M, Oclee-Brown J. A New Methodology for the Acoustic Design of Compression Driver Phase-Plugs with Concentric Annular Channels. In: AES Convention 123. Audio Engineering Society; 2007. Paper 7258. Available from: https://aes.org/publications/elibrary-page/?id=14316

@inproceedings{Dodd2007_14316,
  author = {Dodd, Mark and Oclee-Brown, Jack},
  title = {{A New Methodology for the Acoustic Design of Compression Driver Phase-Plugs with Concentric Annular Channels}},
  booktitle = {AES Convention 123},
  note = {Paper 7258},
  year = {2007},
  month = oct,
  publisher = {Audio Engineering Society},
  url = {https://aes.org/publications/elibrary-page/?id=14316}
}

TY  - CPAPER
TI  - A New Methodology for the Acoustic Design of Compression Driver Phase-Plugs with Concentric Annular Channels
AU  - Dodd, Mark
AU  - Oclee-Brown, Jack
T2  - AES Convention 123
M1  - Paper 7258
PY  - 2007
DA  - 2007/10/06
UR  - https://aes.org/publications/elibrary-page/?id=14316
PB  - Audio Engineering Society
LA  - en
AB  - In compression drivers a large membrane is coupled to a small horn throat resulting in high efficiency. For this efficiency to be maintained to high frequencies the volume of the resulting cavity, between horn and membrane, must be kept small. Early workers devised a phase-plug to fill most of the cavity volume and connect membrane to horn throat with concentric annular channels of equal length to avoid destructive interference [1]. Later work, representing the cavity as a flat disc, describes a method of calculating the positions and areas of these annular channels where they exit the cavity, giving least modal excitation, thus avoiding undesirable response irregularities [2]. In this paper the result of applying both the equal path-length and modal approaches to a phase-plug with concentric annular channels coupled to a cavity shaped as a flat disc is further explored. The assumption that the cavity may be represented as a flat disc is investigated by comparing its behavior with that of an axially vibrating rigid spherical cap radiating into a curved cavity. It is demonstrated that channel arrangements derived for a flat disc are not optimum for use in a typical compression driver with a curved cavity. A new methodology for calculating the channel positions and areas giving least modal excitation is described. The impact of the new approach will be illustrated with a practical design.
ER  -