Opens in a new tab

AES E-Library

← Back to search

Conference Paper Open Access

Loudspeaker Motor Design Using Iron Nitride Magnets

Authors: Devantier, Allan; Bezzola, Andri

AES Show 2026 Nashville · Paper 21 · October 2026

Abstract

This paper evaluates iron nitride permanent magnets as an alternative magnet material for loudspeaker motor design, with emphasis on magnetic performance, package efficiency, demagnetization margin, and thermal stability. Representative woofer and tweeter motors were modeled using nonlinear finite element simulations and compared against established magnet materials including neodymium-iron-boron, ferrite, aluminum-nickel-cobalt, and samarium cobalt. For the woofer study, equivalent motor geometries were developed to maintain comparable voice-coil flux density and steel saturation while varying magnet dimensions and operating point. The iron nitride motor achieved the target gap flux density while reducing magnet mass by approximately 460 g relative to the ferrite baseline, demonstrating a practical design space between ferrite and rare-earth solutions. In the tweeter study, the iron nitride motor was able to match the neodymium baseline flux density with only a modest increase in magnet thickness. Temperature-dependent simulations showed the principal advantage of iron nitride: a very low reversible thermal coefficient. Across the modeled temperature ranges, iron nitride maintained a nearly constant magnet operating point and less than 1% variation in voice-coil flux density, compared with significant flux loss for ferrite and neodymium. These results indicate that iron nitride magnets can support loudspeaker motors with reduced thermal compression, more stable Bl, and more consistent electrical Q, while reducing reliance on critical rare-earth materials.

Details

Published in
AES Show 2026 Nashville
Paper number
21
Publication date
October 30, 2026
Session subject
Loudspeaker Motor Design Using Iron Nitride Magnets
Type
Conference Paper

Save to list