IEC-60268-16 rev. 5 describes test signals in Annexes A and C that are intended to be used to verify STIPA implementations. If you are implementing STIPA in software or firmware, we recommend that you closely study the standard (including Annexes A and C) and take guidance on verification requirements that are given there. A summary of the test signals, and how these are to be used, are given in the IEC-60268-16 Test Signal description that can be downloaded from the AES Standards web site.
Posted: Sunday, November 7, 2021
« AESSC Fall 2021 meeting reports are online | Main | AESSC Fall 2021 meeting reports are online »
