|
PAPERS |
|
Nonlinear Modeling of the Heat Transfer in Loudspeakers
(PDF-303K) |
|
|
Wolfgang Klippel |
3 |
|
Traditional analysis of a loudspeaker assumes that thermal and
electromechanical models can be represented by linear coupling. Careful
examination with a variety of music samples shows that such a model
fails to produce accurate results because both systems are intrinsically
nonlinear. Especially at low frequencies, the cone movement produces
cooling and lower temperatures. A linear approach considers only the
input power to the thermal model, while a nonlinear approach includes
displacement, velocity, and two components of power dissipation. The
nonlinear model is more accurate. |
|
|
Comment on this paper
|
|
| |
|
Simultaneous Measurement of Multichannel Acoustic Systems
(PDF-292K) |
|
|
Alberto González, Pedro Zuccarello, Gema Piñero, and María de Diego |
26 |
|
Measuring the linear properties of a multichannel audio system can be
viewed as a collection of single- channel systems if each channel is
measured in isolation. With a large number of input and output channels,
a sequential measurements approach takes increasing amounts of time.
Using time or frequency multiplexing allows all measurements to be
performed simultaneously. A theoretical framework shows the validity of
this approach. |
|
|
Comment on this paper
|
|
| |
|
A New Thermal Model for Loudspeakers
(PDF-254K) |
|
|
Fabio Blasizzo |
43 |
|
Conventional models of temperature in loudspeakers usually ignore the
transport of heat from the forced-air convection cooling produced by
movement of the loudspeaker cone. Especially at low frequencies in large
woofers, force ventilation is the dominant mechanism for heat transport.
Because high temperatures produce distortion and degradation, designers
need an accurate means of including thermal tradeoffs. Simulation
results show that the new model predicts voice-coil temperature more
accurately. |
|
|
Comment on this paper
|
|
| |
|
ENGINEERING REPORTS |
|
Effect of Arrival at Time Correction on the Accuracy of Binaural Impulse Response Interpolation-Interpolation Methods of Binaural Response
(PDF-216K) |
|
|
Mitsuo Matsumoto, Susumu Yamanaka, Mikio Toyama, and Hiroaki Nomura |
56 |
|
When attempting to create a head-related transfer function (HRTF) for a
source that can have a continuous location, spatial HRTFs at discrete
locations are generally interpolated to get the desired response.
Numerous methods of interpolation have already been investigated, but if
the methods include time correction, accuracy is improved. Angular
shifts in the source location, in addition to changing the response's
fine structure, also produce a small time shift because the ears are not
located at the center of the head. Azimuth changes produce a time shift. |
|
|
Comment on this report
|
|
| |
|
STANDARDS AND INFORMATION DOCUMENTS |
|
AES Standards Committee News
(PDF-24K) |
62 |
|
Secretariat note; peak levels; digital input/output interfacing; storage and handling of media; acoustics and sound source modeling
|
|
| |
|
FEATURES |
|
New Horizons in Listening Test Design
(PDF-572K) |
65 |
|
Novel Surround Sound Microphone and Panning Techniques
(PDF-191K) |
74 |
|
Updates and Corrections to the 2003/2004 International Sections Directory
(PDF-23K) |
81 |
|
117th Convention, San Francisco, Call for Papers
(PDF-13K) |
99 |
| |
|
DEPARTMENTS |
|
News of the Sections
(PDF-167K) |
84 |
|
Sound Track
(PDF-23K) |
90 |
|
New Products and Developments
(PDF-32K) |
91 |
|
Upcoming Meetings
(PDF-14K) |
92 |
|
Available Literature
(PDF-76K) |
93 |
|
Membership Information
(PDF-21K) |
94 |
|
Advertiser Internet Directory
(PDF-17K) |
95 |
|
In Memoriam
(PDF-503K) |
96 |
|
AES Special Publications
(PDF-80K) |
101 |
|
Sections Contacts Directory
(PDF-34K) |
106 |
|
AES Conventions and Conferences
(PDF-75K) |
112 |
| |
|
EXTRAS |
|
Cover & Sustaining Members List
(PDF-33K) |
|
|
VIP List & Editorial Staff
(PDF-30K) |
|
|
Ads In This Issue
(HTML) |
|